USA manufacturer database
Are you looking for information on USA
manufacturers. Then check out the previews of data we have available in our database.
Price is only 250 euros
here to order now. After payment we will send you download
instructions to download the complete database.
Previews of data we have
Category: Rubber Products
Atlantic India Rubber Company serves a wide range of OE manufacturing and MRO
industries with an expansive line of "off the shelf" mechanical rubber and
plastic shapes. Over 14,000 standard shapes are able to be handled without a
Atlantic India Rubber Company was founded in 1919 on the
principal of providing
our customers with 100% conformance to their engineering specifications and
on-time delivery at a competitive price. At the turn of the century, the highest
quality of rubber came directly from rubber trees in India. "Atlantic" was added
because of the route taken by the ships importing the raw material. From 1919
and forward into the 21st century, Atlantic India stands for superior quality
City: Pompano Beach
Category: Cam & Groove Couplings & Accessories
Manufacturers of Cam and Groove Couplings & Accessories.
Category: Microwave Assemblies
Atlantic Microwave Corporation brings over 35 years of engineering and
manufacturing excellence in meeting our customer's requirements for Antenna
Subsystems, Positioners, High Power Microwave Components and Integrated
Assemblies. Our diverse engineering and manufacturing expertise allows AMC to
offer these products as individual components or packaged as part of subsystems
for higher levels of integration.
Category: Radiation Safety Supply
Manufacturers of radiation safety supplies.
Category: Polyethylene Products
AtlanticPoly Inc is a New England based polyethylene manufacturer and national
wholesale distributor of plastic products
Category: Fourslide Products
Atlantic Precision Spring Inc is a manufacturer of fourslide products,
stampings, springs, wire-forms, and subassemblies. APS services the Appliance,
Automotive, Medical, Hardware, Electronics, and many other industries with
quality components for a wide variety of applications.
Category: Precision Rubber & Plastic Products
Atlantic Rubber Company is your full service source for high-quality precision
rubber and plastic products. Serving the industrial, military, pharmaceutical
and commercial markets, we offer expertise in application design, advanced
manufacturing procedures and outstanding quality control. We are proudly ISO
Category: Surge Protection Devices
Atlantic Scientific Corporation was founded in 1977 and is located in West
Melbourne, Florida. We are a wholly owned subsidiary of MTL Instruments Group
and are the surge protection division of the MTL Instruments Group.
Atlantic Scientific has extensive experience in the
design and manufacture of
surge protection devices for a wide range of applications. Our innovative
patented technology has provided industry firsts in many areas. We developed the
first five stage hybrid technology, the first modular snap-in and plug-in data
protection, the first UL Certified Cat 5 compliant surge protectors, and the
first customer configurable power protection platform designed with slide-in
"mix and match" data protection modules for complete upgradable protection of
all sensitive electronic equipment.
Our award winning customer service includes a team of
application engineers with over 50 years experience providing creative,
customized solutions which improve the performance of customers' complex
electrical and electronic systems.
Category: Ultraviolet Water Purification Systems
Atlantic Ultraviolet Corporation was established as a New York Corporation on
November 22, 1963 to assume operation of a predecessor company following the
death of its owner/operator. The business started in Long Island City as a
manufacturer of germicidal ultraviolet fixtures and equipment utilizing
germicidal ultraviolet lamps to destroy bacteria, mold and virus in air and on
Category: High Bandwidth Optical Equipments
Today, Leading Original Equipment Manufacturers specify Atlantic Vision Fiber
Optic Assemblies and Cables.
Atlantic Vision is a major distributor of high
performance fiber optic
components including; Cable Assemblies, Connectors, Transceivers, Switches,
Lasers, WDM's and Couplers and Ferrules. Atlantic Vision's reputation is built
on aggressive pricing and backed by prompt and responsive service. We guarantee
that all products meet or exceed industry standards and are Bellcore 326
approved. Our world wide customer base is made up of Distributors and OEM's.
Atlantic Vision offers innovative fiber optic components
for applications in
Metro/Access Optical Networks. We also provide WDM, DWDM, CWDM, Transmitters and
Receivers, and Laser Diode Modules for next generation optical networks.
Category: Optical Products
Atlantis Optical Laboratories is an innovative and dynamic manufacturer of
quality optical products.
Our personnel bring to the industry nearly fifty years of
From laser quality optics, lenses, mirrors, aspherics, plano surfaces, in a
large variety of materials - UV to IR. Whatever your requirement, Atlantis
Optical Laboratories can meet your specifications.
Category: Electric & Pneumatic Tools
The Atlas Copco Group has more than 25 000 employees and manufactures products
on 49 production sites in 16 countries on five continents. Atlas Copco companies
develop and manufacture electric and pneumatic tools, compressed air equipment,
construction and mining equipment, assembly systems, and offer related service
and equipment rental. The products are sold and rented under different brands
through a worldwide sales and service network reaching 150 countries, half of
which are served by wholly or partly owned sales companies. Head office is in
Category: Air & Gas Compressors & Generators
Atlas Copco is a global industrial group headquartered in Stockholm, Sweden. The
Group, which was founded already in 1873, employs today more thab 25 000 people
and manufactures products in 16 countries on five continents.
Headquartered in Des Plaines, Illinois, Atlas Cylinders has been one of the
largest suppliers of high-quality, dependable cylinders to the industry for more
than 40 years. Originally known as Sawyer Machine Works, the company grew and
evolved by supplying pneumatic cylinders for the Pacific Northwest's thriving
timber industry. Our first line of cylinders, under the trade name of Atlas, was
developed and manufactured in 1953. And we've been growing ever since.
We have developed a system of manufacturing that is
flexible and quickly
adaptable to customer needs, but which also maintains the speed and efficiency
associated with standard "assembly line" operations. Our eight Cylinder Division
plants are strategically located throughout North America to provide
personalized product and customer service on local basis.
Much of our business is focused on the manufacture of
custom cylinders, so we
place a greater emphasis on engineering than most of our competitors. Moreover,
our engineers are equipped with the most advanced CAD and CAE and FEA software
tools for drawing, imaging, graphics, and stress analysis. These advanced
production tools allow our engineers to deal directly with your engineers,
making sure each custom cylinder meets your needs and specifications precisely.
Category: Weathering Testing Instruments
Atlas is headquartered in Chicago, Illinois and its European headquarters in
Linsengericht, Germany. Atlas has two design and manufacturing sites worldwide
for the internationally accepted Weather-Ometer(r) and Xenotest line of test
instruments; Chicago, Illinois and Linsengericht, Germany.
With the combined resources of Atlas Material Testing
Technology LLc, Atlas
Weathering Services Group and K.H. Steuernagel, our clients can have expert
assistance in all areas related to natural and laboratory weathering and
material testing solutions. As the Atlas Network of Weathering, we work together
to provide our clients with a test program that will supply the data needed to
make informed material performance decisions.
City: Ft Lauderdale
Category: Electrical Frequency & Power Conversion
Premiere manufacturer of gaskets, sealing products and other cut parts.
Category: Heat & Corrosion Resistant Steel
Atlas is the world's leading stainless and aluminized steel service center for a
number of reasons, but the biggest single reason is our people, the Atlas
Associates. Our team members all report to the same person, the customer. Our
organizational chart has you on top.
Atlas is a unique kind of steel service center driven to
expectations with friendly, competent service. Atlas delivers more than
precision processed steel and world-class tubing. We learn our customer needs
inside-out, offering technical suggestions and solutions to any number of
problems, from tough delivery schedules to finding just the right steel for your
application, to providing customized inventory solutions.
City: North Andover
Category: Power Distribution Products
Atlee offers a complete line of standard and custom power distribution busing
backed by skilled engineering and customer assistance. Product mix ranges from
standard single layer and multi- layer printed circuit board level buses to
large high current custom designs.
Category: Microwave Components
ATM's Microwave measurement capability up to 50GHz makes us the best choice for
the design and manufacturing of your components.
Our in house design, manufacturing, inspection and
quality control capabilities
allow fast response to our customer requirements.
Many of our designs are Form Fit and Function Equivalents
to those manufactured
by other component companies in the industry.
High quality, exacting standards, and excellent
workmanship make it easy for ATM
to qualify as a second source.
Category: IC Processing Equipment
Founded in the early 1970's, American Tech Manufacturing, Inc. (otherwise known
as ATM) began producing IC processing equipment that not only performed with
unsurpassed reliability, but also offered accuracy that far exceeded customary
tolerances. And it is not mere coincidence that many of these machines are still
serving their users today, long after other competitive IC processors have been
Today, ATM is a world leader in the field, and is still
dedicated to engineering
and manufacturing the most efficient and technically superior IC processing
machinery available for both through hole and surface mount devices ranging from
DIPs to SOICs.
Although over the years ATM has changed, our mission has
not - we still offer
equipment that does the job precisely, efficiently .... meeting and even
exceeding the specifications of JEDEC, ANSI and military standards. With the
recent merger of Trigon Adcotech into ATM, our product range has been extended
to include test handlers, marker/dryer systems and test contactor sets.
Category: DIN Rail & DIN Rail Cutter
All registered Atmco Model LB-100 DIN rail cutters are warranted against defects
in materials & workmanship, under normal use and when used in accordance with
good standard practice, for a period of (3) year (s) from date of shipment from
Atmco has the obligation, under this limited warranty, to
repair or replace, at
our option, any part which is determined by Atmco to be defective. Defective
items must be returned, without charge, F.O.B. factory.
Atmco will not honor any warranty nor be responsible for
damage or wear caused
by neglect or misuse. Atmco will not be responsible for labor charges or any
other expense incurred as the result of any defective part (s). Atmco will not
make allowance for labor, transportation or any charges incurred in the
replacement or repair of a defective part (s).
City: San Jose
Category: Advanced Semiconductors
Atmel Corporation is an industry leader in the design and manufacture of
advanced semiconductors, with focus on microcontrollers, nonvolatile memory,
logic, radio frequency (RF) components and sensors. These functions are marketed
as standard products, application-specific standard products (ASSPs) or
customer-specific products (ASICs) in order to provide a rapid and flexible
response to the needs of Atmel's customers.
Category: Advanced Semiconductor
Atmel Corporation, founded in 1984, is a worldwide leader in the design,
manufacturing and marketing of advanced semiconductors, including advanced
logic, nonvolatile memory, mixed signal and RF integrated circuits.
Atmel is one of the elite new companies capable of
integrating dense nonvolatile
memory, logic and analog functions on a single chip. Atmel chips are
manufactured using the most advanced wafer processes, including BiCMOS, CMOS and
Silicon Germanium (SiGe) technologies.
Category: Sensors & Sensor Interface Systems
Atmos Engineering Inc designs and manufactures high performance sensors and
sensor interface systems characterized by high accuracy and aggressive pricing.
Field-proven in extreme environmental conditions, Atmos
products meet stringent
aerospace quality and traceability requirements while offering significant cost
reductions for customers.
Because every application is unique in some way, Atmos
modules are customized to
fit our customers' specific protocol, power and real estate requirements. We
deliver accuracy in a package that fits at a price that works.
Category: Controlled Environments
Our philosophy is one of single-source responsibility. We at Atmos-Tech pride
ourselves in our team approach to complete in-house design and production. Our
team of experienced professionals work to design, manufacture, test, ship,
deliver and certify our equipment, giving significant attention to the needs of
the customer. We do not involve outside contractors. This allows your Atmos-Tech
team to take full responsibility for all of your company's needs and enables us
to answer all of your questions. We attribute our success to the more than
thirty years we have devoted to our customers utilizing this philosophy.
City: St Louis
Category: Hydraulic Die Cutting Presses
Atom has been manufacturing hydraulic die cutting presses in Vigevano, Italy for
over fifty years. Currently, Atom controlls nearly 70% of the market share
worldwide with over 100,000 units in prodcution. These range in production from
small cutting presses to computerized controlled CNC cutting presses. In
addition, Atom Presses offer a wide range of cutting powers to satisfy all types
of converting applications. Atom's use of oil dynamic performace greatly reduces
energy consumption. Unlike many companies that use other software and electronic
componets from other manufacturers Atom offers its customers electronics,
integrated nesting software and feeding systems all desinged and manufactured in
one facility. Atom's vast clientel throughout the world include; Playtex, Garden
State Tanning, Gucci, Dock Marten and Nike just to name a few.
Category: Intensive High Tech Materials
Atomergic Chemetals Corporation is an American enterprise that utilizes its own
production facilities and works with specialists from all over the world. We
deal with the manufacture of intensive high tech materials and possess the
ability to produce and investigate many materials, from starting materials to
finished products, at various stages of development. Our greatest strength is
the ability to recruit and exchange highly qualified and experienced researchers
and de signers from our various affiliates.
Atomergic Chemetals Corp is able to pursue an almost
endless range of
investigations on the composition and structure of materials and epitaxial
structures using the latest techniques; including macro- and microanalysis, as
well as studies of physical properties (photoluminescence and
cathodo-luminescence, DLTS) and crystal structure defects (TEM, SEM, diffraction
City: Rock Hill
Category: Electroplating & Electronics
Atotech is one of the world's leading suppliers of processes, services and
equipment for General Metal Finishing, Semiconductor and Printed Circuit Board
Manufacturing. The installation of additional divisions like Microstructured
Components, Electronics Materials and Wafer Technology plays an increasingly
important part for the future growth of our company and our customers.
Our products comply with all specifications and standards
defined by automotive,
electrical and electronic component manufacturers. With 14 production plants (12
for chemistry, two for equipment) in Asia, Europe and the Americas we are never
too far away to meet your demands.
Category: Memory Products
A qualified memory manufacturer for Intel, Sun Microsystems, Asus, Supermicro,
Tyan, Abit, Apple, Biostar, Compaq DEC Alpha, DFI, Gigabyte, IWill, Micronics,
MicroStar, Soyo, and Tekram.
Category: Industrial & Commercial Vacuum Cleaners
Atrix International Inc is a leading manufacturer of industrial and commercial
vacuum cleaners for toner, developer, dust and soot. In addition, the company
makes a complete line of HEPA and ULPA vacuums and filters. Atrix also
manufactures remote metering, tracking and monitoring hardware for the copier
and digital printer industry. In addition, the company offers a production and
process monitoring system for the plastics injection and blow molding industry.
They stock and distribute ESD products, wrist bands, coil cords, tools, tool
kits, instrumentation and cleaning supplies for the copier, computer, medical
and telecommunications industries.
Category: Machining Equipment
Atrump Machinery Inc has been in business in the USA for approximately 10 years
.It is the branch office of five Taiwanese manufacturers that supplys various
machines such as, Milling Machines, Precision Lathes, Universal and Monaset
Tools and Cutter Grinders, and CNC Mills, Lathes and EDM and Horizontal Band
Extron is the manufacturing name in Taiwan; and these
five facilities are owned
by Extron. With 35 years in the business, Extron has become one of the top
manufacturers in Taiwan, with business worldwide. We sell approximately 2000
machines per year and are an ISO9002 certified builder.
Category: Precision Surface Process Equipment
Eco-Snow Systems, provides CO2 precision surface process equipment for a broad
range of cleaning applications in the semiconductor, compound semiconductor,
photomask, flat panel display (FPD), fiber optics, and disk drive industries. As
a leading innovator of dry CO2 technology, Eco-Snow Systems, sets the standard
for quality dry process cleaning solutions. The company holds over 20 U.S.
patents and has R&D clean room facilities to conduct process qualification and
testing for customer application development.
Category: Fiberglass Duct & Fiberglass Pipe
Our plan is to achieve this by offering a complete line of products and services
that addressed all concerns and needs of its customers regarding corrosive-fume
exhaust ducts. We will provide products and services always of the highest
quality and reliability, in a timely manner and at a competitive price. We will
design our products and services through a process whereby we will listen
intently to our customers, both internal and external, understand their ideas
and problems, and be flexible and act promptly in gearing out activities to meet
their expectations and needs. Our literature, instructions and paperwork will be
accurate and easy to understand. Our products will be clearly marked, properly
protected and clean on arrival.
Category: Comprehensive Instrumentation
ATS RheoSystems is a comprehensive instrumentation and technical support company
specializing in rheometer and viscometer design, research level rheometers and
rheology, rheological consulting, viscometers and viscosity measurements,
real-time light and thermal cure profiling, low and high pressure rheology
measurements, dynamic shear rheometers (DSR) for asphalt testing according to
AASHTO T315-04, dynamic mechanical thermal analysis (DMTA), and materials
characterization instrumentation. We address the needs of the serious
rheologist, and maximize the utility, uptime, and return on your instrumentation
Category: Workholding Machine Tool Accessories
ATS has been serving machinists and the machining industry with quality
workholding solutions for 20 years. By continually adding new products to our
line, ATS has stayed at the forefront as technology has advanced and the demands
on manufacturing processes have grown increasingly sophisticated.
It is our mission to provide our customers with superior
sales, service and
support of our products to ensure your complete satisfaction. Our professional
sales staff and customer support will provide you with the assistance needed to
select the proper work holding solution for your specific application.
Category: Enterprise Information Access & Management Software
For twenty years, Attachmate Corporation has been a leading supplier of
enterprise information access and management software and services to major
corporations and government agencies worldwide. Attachmate(r) customers
represent some of the biggest names in business today; Fortune 500 and Global
2000 customers who expect the best. And that's what we deliver.
Customers that rely on Attachmate for mission-critical
host access solutions
span a wide range of global industries, including banking, finance, insurance,
medical and healthcare, technology, automotive, manufacturing, retail,
hospitality, commercial airlines and transportation, and government agencies.
Category: Storage Connectivity
Since its founding in 1988, Atto Technology Inc headquartered in Amherst, New
York, has positioned itself as a global leader in storage connectivity and
infrastructure solutions for data- intensive computing environments. It is our
vision to provide a wide range of end-to-end solutions to help customers better
store, manage and deliver their data. Our company's experience in engineering
advanced technology into real-world product solutions provides customers with a
unique competitive advantage.
Category: Multiplexing Video Products
Advanced Technology Video Inc was founded in 1983. The company was originally
formed as a technolgy company focused on designing and building industry leading
multiplexing video products for the CCTV industry. It has been our strength over
the years to be able to identify opportunities in product categories, especially
in the area of video processing, and to be able to manufacture products that
could compete with and surpass those currently offered in the market place.
>From the start, ATV(r) realized that the only way to
compete in the industry
was to deliver maximum value, innovative features, competitive pricing, highly
reliable products and great customer service. This is why we have developed a
reputation for the best Customer Service in the industry.
ATV(r) products are leading edge, constantly evolving and
improving. We are
recognized as a company that delivers many product features without compromising
quality. With consistent hard work, we have become a leader in the CCTV
Category: Interconnect Products
Atwater is both a manufacturer and a distributor of interconnect products,
dedicated to meeting our customers requirements with on-time delivery of quality
goods and services at competitive prices.
To this end we provide positive solutions to interconnect
knowledgeable sales engineers, in depth stock of standard product and inventory
support for customers who use non-standard product.
Category: Valves & Controls
Welcome to Weir Valves & Controls Division, leaders in critical service and
isolation applications and solutions for the power generation, oil and gas
exploration and general industrial sectors.
Our global reputation is based upon our capability to
solutions that add value to the customer's process. We offer a total package of
products to meet end-to-end project requirements. Using our own analysis and
configuration system, we will design and deliver the optimum valves and controls
solution to protect the value of the production process.
The company was organized in 1982. As a former division of a major US
manufacturer it has almost 60 years of gear manufacturing experience at this
location. Customers served are international builders of vehicles and machinery
for the automotive, truck, bus, aerial lift, agricultural, light and heavy
construction, mining, forest products and marine industries. Capabilities
include full line design, development, test and manufacture of a wide range of
geared products. Facilities include development, gauge, gear and metallurgical
laboratories. Production facilities on premises include capability for turning,
gear cutting, spline rolling, heat treat, shot peening and finished grinding.
Shipment of product to customer certified quality standards is made on a just in
time basis. Application engineering capability in collaboration with customer
engineering departments insures optimum product performance.
Category: Triboelectric Filter Bag Leak Detector
Auburn introduced the first triboelectric filter bag leak detector for air
pollution control applications more than twenty years ago, since then nearly
thirty thousand Auburn units have been installed around the world. We are
painfully aware that our reputation and competitive standing depends upon what
we do today, not what we have done yesterday. Consequently, we have continually
improved the original concept and the technology has evolved into the most
advanced dust collector management and control system for today's increasingly
complex dust collectors. The "Auburn Tribo.series" has materialized as the most
reliable technology for dust collector monitoring and control available today.
City: Buffalo Grove
Category: Software Systems
Aucotec is one of the worlds largest independent software companies focused on
developing software systems and complementary consultancy for planning and
operating electrical engineering and process automation plants.
Apart from our Chicago office and head office in Hanover,
Auctotec has a further
development centre in Frankfurt and a subsidiary in Vienna. Our international
success is based on our global network of longstanding sales partners whose
competence offers our customers' worldwide support.
City: Santa Clara
Category: Low Power Logic Controller Chips
Auctor Corporation is headquartered in Santa Clara California, with a subidiary
in Taipei, Taiwan. The company evolved from ACC Microelectronics Corporation
(ACC Micro), a leading manufacturer of Low Power Logic (LPL) controller chips.
As a leading manufacturer of Windows-based connectivity
products for computer,
communication and consumer applications, our experience in embedded and portable
designs, and our innovative core technology enable us to become a major player
in emerging explosive markets for embedded and portable applications. With
headquarters in Santa Clara, California, the heart of Silicon Valley, the
company positions itself well to provide the high performance and cost-effective
products necessary to meet the needs of today's highly competitive global
City: San Jose
Category: Voip Solutions
AudioCodes Ltd enables the new voice infrastructure by providing innovative,
reliable and cost-effective Voice over Packet technology and Voice Network
products to OEMs, network equipment providers and system integrators. AudioCodes
provides its customers and partners with a diverse range of flexible,
comprehensive media gateway, server and processing technologies, based on
VoIPerfect(tm) - AudioCodes' underlying, best-of-breed, core media gateway
architecture. The company is a market leader in voice compression technology and
is a key originator of the ITU G.723.1 standard for the emerging Voice over IP
market. AudioCodes voice network products feature media gateway and media server
platforms, which function as core gateways or CPE voice gateways for
packet-based applications in the wireline, wireless, broadband access, and
enhanced voice services markets. AudioCodes enabling technology products include
VoIP, CTI and call logging communication boards, VoIP media gateway processors
Category: Tape & Media Degaussers
Garner Products is the world's leading degaussing manufacturer. Garner's
degaussers are used to erase (sanitize) data from magnetic media. Common media
formats include DLT, DAT, AIT, 8mm, 3480, 3490, VHS, Beta SP, Beta SX and Hard
Drives. Garner manufactures a wide range of sizes and styles to fit your
degaussing needs - from economical table-top degaussers to our efficient
conveyor style degaussers.
Category: Audio Test & Measurement
Manufacturers of test & measurement equipments.
Category: Electro-Acoustic Products
Audio-Technica has been dedicated to advancing the art and technology of
electro-acoustic design and manufacturing since 1962.
>From a beginning in state-of-the-art phono
cartridges, A-T has expanded over
the years into high-performance headphones, microphones, mixers and electronic
products for home and professional use. In each new area the goal has been to
create innovative, problem-solving products.
The results of these engineering and production efforts
can be seen in the
effective use of A-T products in a broad spectrum of applications.
Audio-Technica microphones, for example, are found in
daily use in major
broadcast and recording studios, and relied upon by top touring musicians. A-T
mics are chosen for important installations and major events, such as the U.S.
House of Representatives, the U.S. Senate, the Super Bowl, World Cup Soccer and
Category: Wire Mesh Conveyor Belt
Audubon is the leading conveyor belt manufacturer of wire mesh metal woven
belts. Mfg for over a century our conveyor belts are used worldwide. Known in
the industry as Furnace Belts, Baking Bands, Mesh Belts, Chain Belts, Lehr
Belts, Metal Woven Belts, Wire Belts....
We manufacture tight mesh for flexibility and conveying
small parts, special
smooth surface belts for easy accurate transfer, and wire belts with large
openings for easy flow of air or water and for simplified cleaning. Our conveyor
belts are used to convey metal parts through copper and aluminum brazing
furnaces, bronze and iron parts through sintering furnaces, textiles and
chemicals through oven dryers as well as for a variety of washing, annealing,
quenching and polishing operations. In the food processing industry our belts
are used to clean dry, bake, cook, freeze, salt, can and much more.
Category: Electronics Contract Manufacturing
Auer Precision has maintained a long standing reputation for exceptional quality
and execution on challenging projects. Our collaborative philosophy across all
levels of customer interactions provides the basis for creativity, pragmatic
design and custom product realization.
Auer provides precision components, complex assemblies,
class A tooling and full
contract manufacturing services. Customers benefit from highly responsive
design, prototyping, product lifecycle management and easy access to all
Category: Wafer Manufacturing
August Technology Corporation, headquartered in Bloomington, Minnesota, is a
leading manufacturer of automated visual inspection solutions for the vast
microelectronics industry. Founded in 1992, August Technology's systems are used
by nearly every major microelectronics manufacturer in the world to improve
product quality, manufacturing productivity, device yields and time-to-market -
increasingly important considerations in the competitive and evolving
Category: Power Conversion Products
Ault currently manufactures a line of external (outside of the OEM's product)
power supplies, transformers and battery chargers. Ault created the market for
these products in late 1970 to fulfill a developing OEM need to reduce the size
of their products. The external power conversion niche is the fastest growing
segment of the power supply market, fueled by the overall trend of size
reduction and density in the worldwide electronics industry. Ault has positioned
itself as the industry leader with a 12 percent market share which we are
increasing by continuing to develop products and services that fulfill our
City: Fort Wayne
Category: Coil Winding & Motor Winding Systems
Aumann, founded in 1936, is a German machine manufacturer of Coil & Motor
Winding Systems for wire sizes 4 - 56 AWG (0.01 - 5 mm), as well as Wire
Our headquarters and manufacturing facilities are located
in Espelkamp, Germany
with branch offices worldwide. Our main office servicing the North American
markets, established in 1981, is based in Fort Wayne, Indiana-USA.
We are a customer-oriented organization with over 60
years of experience. From
stand-alone winding machines with 1 - 20 spindles, to fully automatic modular
production systems, Aumann stands for precision work, characterized by
Category: Valve Actuators
Auma has been manufacturing valve actuators for over 40 years and is a major
supplier of electric actuators and manual operators to industry.
City: Mountain View
Category: Instrument Tube Fittings
Aura is a leading manufacturer of Instrument tube fittings, Instrument Needle
Valves & Manifolds,Thermowells and mechanical housing/parts for temperature,
flow , pressure sensors. Aura also delivers single point ( EPC/LSTK) turnkey
solutions in the Process Control Instrumentation and Plant Automation domain.
Category: Fine Relaible Tools
Aurand is the manufacturer of fine reliable tools, for surface preparation,
scale and rust removal.
Aurand has manufactured exclusively in the USA since
Our fine quality tools can be used as a concrete
grinders, scarifiers, paint
chippers, needle scaler and paint remover.
Category: Power Induction System
The AuraGen is a maintenance-free power induction system developed by Aura
Systems Inc that turns a vehicle into a mobile power generation system. The
G5000 produces 5kW of power and the G8500, 8.5kW. Each generates clean 60 Hz AC
power suitable for use with sensitive electronic equipment.
The AuraGen provides mobile power for utilities,
telecommunications, fire/police/rescue, farmers, recreation, service vehicle
operators, or any users that need power on the job. In addition we offer a
Manual Transfer switch which allows the AuraGen to power up your home or
business during power outages. The system can be configured with either 120/240
VAC 20-amp circuit or a 120 VA 40-amp circuit. A remote power strip in either
voltage configuration is also available for hard-to-reach places and rugged
terrain. For added convenience and safety, a keyless remote start is also an
City: Orchard Park
Category: Industrial Machining
Aurora Industrial Machining is a customer-oriented non- union manufacturer of
custom designed ASME Code heat transfer equipment, standardized off-the-shelf
non-code heat exchangers; vane, tuyere, mesh and cyclone tube moisture
separators; pressure filters and fuel gas filter-separators. Our engineering and
sales personnel have over 25 years of technical experience in rating, designing
and applying this equipment. AIM's know-how and creative engineering in this
specialized field assures our customers of the best selection for the
application at the most economical price. AIM was created and has continued to
grow because of customers' needs for fast estimating service and on-time
delivery of a quality product.
Category: Fiber Optic Splicing Equipment
Based in Ambler, Pennsylvania, Aurora Instruments Inc designs, manufactures,
distributes, and services fiber optic splicing equipment and other fiber optic
products. Aurora has customers around the world, sales offices for over
forty-one countries, and factory- trained facilities in five countries around
Established under its present name in 1990, Aurora
acquired the Orionics product
line of fiber instruments from Ametek, Inc, in 1991. Orionics, in turn,
originally located in Bozeman, Montana, introduced the world's first
commercially-available fusion splicer and OTDR in 1978. Aurora/Orionics now
represents a twenty-one year record of continuous achievement, quality, and
Aurora is the Only U.S. manufacturer of field-worthy
fiber optic fusion
splicers. Its principal products include the FW312, the world's most rugged
automatic fusion splicer; the sleek Fusion 2500 with two simultaneous views of
the fibers in an award winning design; the new Fusion 3000 with ultra-fast PAS
operation, two simultaneous x/y views of the fibers, sub-pixel image processing,
and ultra-precise LID (Local Injection/Detection) alignments for the ultimate in
versatility and splicing power. Aurora also distributes in North America the
British- made Fase II mini-splicer.
Category: Night Vision Equipment
Much like our name suggests, Aurora Tactical is on the dawn of providing the
finest weapons and night vision equipment to the consumer without sacrificing an
essential commitment to customer service. Since our company's inception, our
objective has been to construct the best equipment and offer it at the lowest
City: Benton Harbor
Category: Heavy Duty Brakes
Ausco Products Inc is a high tech supplier of heavy duty, off highway brakes for
original equipment and replacement applications.
City: Simi Valley
Category: Power Products
Our mission is to apply Autec's core technologies and expertise to develop,
manufacture and distribute quality products and services worldwide that meet or
exceed customers' needs in areas concerning the transformation of energy and
Category: Semiconductor Products
AuthenTec Inc is a leading semiconductor company providing advanced biometric
fingerprint sensors to the PC, wireless, PDA, access control and automotive
markets. AuthenTec's FingerLoc and EntréPad product families utilize the
Company's patented TruePrintTM technology, the first technology capable of
imaging everyone under virtually any condition. TruePrint images below the
surface layer of the skin to the live layer where the true print resides,
thereby eliminating surface- level contamination issues. AuthenTec's products
are the choice of leading industry hardware and software providers, ensuring
compatibility across multiple platforms and applications. Based in Melbourne,
Florida, AuthenTec has assembled a global network of partners, solution
providers and customers including Texas Instruments, IBM, Delphi, Acer,
Synaptics, Asus, Harris Corporation and SCM Microsystems.
AuthenTec supports the customer with a complete range of
development tools, extensive documentation, Help Desk, Product Application
Engineering consultation and support, and even on-site Field Engineering if
Category: Precision Machine Products
In 1988, John C Kennedy, our current CEO, established Autocam to provide
precision-machined solutions for customers in the automotive market. We have
grown rapidly through a combination of long- term customer relationships,
aggressive marketing and strategic acquisitions, which include well-established
companies in North America, Europe and South America. Autocam is one of only a
few companies capable of handling major automotive projects from concept through
Category: Quick Disconnect Couplings
Opening it's doors in 1935 with an idea for a better Beer Rod Coupling,
Snap-tite today is a global organization manufacturing quick disconnect
couplings, hydraulic and solenoid valves, lay-flat hose and high-pressure
valves, vessels, reactors and fittings in seven different USA manufacturing
plants and one in the Republic of Ireland.
>From fluid power components that take us into space,
to fire hose products that
save our forests and communities, and also to valves, fittings and research
equipment that safely harness ultra-high pressures, our strength is providing
expert solutions matched to the needs of each customer... highly consistent
quality in exactly the right product, delivered on time, at the right price.
City: Farmington Hills
Category: CNC Controls & Machine Tools
More than just a statement! We back it with 52 years of experience building the
Bendix(r) and Autocon(r) Delta Series CNC control used on America's machine
tools. DynaPath is now using that knowledge to produce a Full Line of CNC
Controlled machines all powered by the DynaPath Delta 2000 series control.
One model is the DynaPath VMC-820. A compact VMC with a
big appetite for steel
and Aluminum. The DynaPath production series 820 Vertical Machining Center is
the answer for shops requiring a small footprint at a competitive price, without
sacrificing rigidity of metal removing flexibility. 32" x 18" x 20" travel
a massive cast frame, headstock, box ways, and a 15 HP spindle that delivers up
to 8,000 RPM giving you the flexibility of cutting both steel and aluminum.
City: San Rafael
Category: AutoCAD Products
For 23 years, Autodesk has invested in people, software, and technology to help
customers realize their ideas-to compete and win.
Autodesk first revolutionized the software industry with
the AutoCAD(r) product,
which introduced drafting on a PC. The widespread popularity of AutoCAD software
forged our company's lifetime commitment to practical innovation that drives
productivity and profitability. AutoCAD also paved the way for Autodesk
technology leadership in industries such as building, infrastructure,
manufacturing, media and entertainment, and wireless data.
Category: Precision Self Feeding Drills
Manufacturer of Precision Self Feeding Drills, Multiple Spindle Heads, Self
Contained Drills, Feed Controls, Automatic Feed Drills, Tapping Heads.
Category: Processing Equipment
Milacron has been Finding a Better Way for global industry since 1884. Today, we
are a world leader in plastics technology and committed to maintaining that
position. Our mission is simply to serve our customers' every need, and to
exceed our competitors' every product, service and technology offering in every
market. Milacron is much more than a machinery maker.
Category: Belt Conveyor Systems
Auto-Kinetics Inc was established in 1992 with a goal to become a
"single-source" of quality belt conveyor systems for light-to- medium materials
handling and extruded structural components for framing and guarding purposes,
both integral components to any automation system.
We strive continuously to deliver a quality product, on
time and at a
City: Nevada City
Category: Telemetry, Software & Sensors
Automata manufactures complete system solutions including telemetry, software
and sensors used in a wide variety of industrial and agricultural applications.
We offer satellite, hard wire, infra Red, narrow band radio, spread spectrum
radio, telephone and fiber optic communications to suit a wide range of
environments. These award-winning products are proven management tools in canal
automation, agriculture, bioremediation, flood warning, irrigation, pump and
well water supply systems. This is our company's Thirtieth year of business in
research, development and manufacturing.
More recent products have become more network oriented.
In the last few years of
the twentieth century several significant network oriented products have been
A fully automated canal control system has been developed
as a result of a
cooperative development effort including USDA-ARS and Automata. The system is
currently under test at a water district in Arizona. With a minimal
initialization after installation this system is designed to fully automate a
Category: Automation Products
Created in 1988, AAI (Automated Applications Inc) has developed a leadership
position as a worldwide supplier of automated manufacturing and test systems. A
rigorous growth strategy and a commitment to excellence has made AAI a leading
supplier of automation, application tooling and test equipment for interconnect,
electronic and other high volume manufacturing applications. At AAI, quality is
a priority at every level of the organization. Quality is built in throughout
the production process, starting with the design of the system and continued
during the entire production cycle.
City: Painted Post
Category: Full Line of Equipments
Manufacturers of full line of equipment viz., cell design & construction,
control & safety components, robot programming, etc.
City: Council Bluffs
Category: Robotics System Integration
Automated Concepts Inc is a recognized industry leader in robotics system
Through our people, technology and innovation Automated
Concepts Inc meets each
unique challenge by designing, manufacturing and programming complete turnkey
robotic applications for a wide range of industries.
Category: Spring Coiling Equipment
Automated Industrial Motion (AIM) incorporated in 1984 to serve the precision
spring making industry. Our first ventures involved upgrading mechanical
equipment with electronic controls to improve productivity.
With the advent of reliable servo motion control in the
late 1980's, a standard
line of computerized spring coiling equipment was developed. Enhanced features
were derived from relationships with experienced spring setup technicians. Eight
standard High-Speed CNC Coiler models, covering a wire range of 0.0015" to
0.625", are currently available. Our state-of-the-art equipment offers the
latest machine tool technologies including PC controls, Windows based software,
industrial touch screen and cassette tooling.
AIM specializes in custom spring coiling and wire forming
applications where standard machinery is not commercially available or for
customers desiring competitive advantage. Services include process and product
development, design, fabrication and integration with other manufacturing
equipment. Turnkey systems are completely tooled, setup and programmed for
customers needing to vertically integrate springs and wire forms into
Category: Laser Products
Automated Laser Corporation provides standard and custom laser integrated
solutions for a wide range of unique applications.
Our background includes automated process development for
welding, marking, drilling and related turnkey systems for various types of
industries. Systems include complete laser path motion control, standard or
custom control software as well as options for material handling, inspection or
Automated Packaging Systems is the only company that manufactures the original,
genuine Autobag(r) pre-opened bags-on-a-roll.
We are larger than all of our pre-opened bags-on-a-roll
competitors combined and
have provided unmatched service to our customers since 1962. With over 25,000
machines in operation and nationwide field service, we are the only company that
can truly provide a total systems approach for your needs.
With our in-house engineering and art departments, we can
provide you with
custom designed machinery and bag design. We also sell many standard "off the
shelf" models of machines. We listen to determine what your needs are and work
in concert with you to determine the best solution. Our three Ohio and one West
Virginia manufacturing plants back up our promise to deliver complete customer
We also provide re-manufactured packaging machinery that
arrives with a 90-day
warranty on parts.
Category: Advanced Metrology Products
Automated Precision is a world leader of advanced metrology solutions for
industry. Founded by Dr Kam Lau in 1987, API has pioneered progressively higher
standards of accuracy for coordinate measuring and machine tool operation. API
products are installed and used by all of the world's leading automotive,
aerospace, machine tool, and CMM manufacturers. API's experienced engineering
team is unmatched in its ability to create advanced innovative products, which
meet the needs of rapid evolving industrial technologies.
API is dedicated to providing solutions for precision
measurement and sensing
challenges encountered in a manufacturing environment. API provides these
solutions - hardware, software, training and service - with a professional,
customer-responsive approach, which is innovative, practical and cost effective.
API is continuously engaged in research and development related to advanced
sensor and error correction concepts. API is an active member of, and a key
technology partner in several federal and industry sponsored programs for the
advancement of various manufacturing scenarios. API is located in Rockville,
Maryland within 15 minutes of the National Institute of Standards and
City: Boca Grande
Category: Level Sensors
Having 20 years experience in ultrasonic level sensors, you can be assured that
our products will perform according to the specifications and to your
Category: Springs & Wire Forms
Automated Wire Products (AWP) was founded in 1996. Realizing the last thing
needed in this country was another all purpose spring company knocking on doors,
we spent the first year of our existence understanding the spring market. We
defined areas of need where our expertise and experience could be best utilized
in supporting our customers to their fullest expectations and beyond.
Our analysis brought us to the conclusion that the ground
specifically to the hydraulics/fluid power industries was one of the toughest,
most critical springs on the market.
With over 50 years of coiling experience in our
personnel, we responded to this
opportunity by making a strategic decision to evolve into a ground compression
spring specialist with a goal of being the finest spring supplier to the
City: San Francisco
Category: Precision Biomedical Equipment
AutoMate Scientific designs, manufacturers and distributes precision biomedical
equipment for neuroscience, biophysics and pharmaceutical research.
Scientists world-wide use our automated perfusion
systems, valves, amplifiers,
manipulators, software and accessories for electrophysiology, imaging,
pharmacology and drug discovery.
Category: Wire & Strip
Automatic Specialties Inc (ASI) is one of America's leading manufacturers of
wire, strip and other metal products, including wire and strip forms,
close-tolerance metal stampings and welded wire assemblies.
With over 30 years in the business, we would like to put
our vast experience in
product quality and customer satisfaction to work for you or your customers.
Category: Process Instruments & Controls
Manufacturers of industrial instrumentation, Automatic Timing and Controls.
Category: Industrial Automation
Located in Novi, Michigan, USA. Established 1945. AV is represented through a
global sales and distribution network. Pneumatic applications include Industrial
Automation, Automotive, Process Control, Aluminum Smelter, and Power Generation.
Category: Sensors & transmitters
Automation Components Inc (ACI) manufactures and provides sensors and
transmitters for a variety of industries. Our products monitor temperature,
relative humidity, pressure, current, air quality, specific gases, light level,
and enthalpy. We also carry products like thermowells, interface devices, power
supplies, and control relays to support our customer's needs.
Our products are compatible with controllers from many
industries. Our products
are used in Building Automation Systems, HVAC, refrigeration, government,
pharmaceutical, and industrial markets around the world.
Category: Sensors & Controllers
Autonics has been established in 1977 and become world class brand of
manufacturing diversified controllers & sensors for factory automation. We have
already been good reputation in Korea as leading company of factory automation
field and have expanded world market based on that. There are 5 local branch
offices in Korea and 4 international branch offices in USA, Japan, Indonesia,
China. And we keep expanding our sales territories all of the world with our
best quality and service.
Autonics has well developed organization and many
experienced sales men to
penetrate various markets in all over the world. Our total turnover has been
massively increasing year by year and we keep trying to grow on and on.
Especially International sales team is trying to give the best service to our
Category: Vibratory Feeder Systems
Automation Devices designs, engineers and manufactures Vibratory Feeders and
Part Feeding Components. Our customers rely on the expertise of our engineers
and the durability of our equipment to integrate quality and dependability with
ADI's production capabilities encompass the development
and tooling of vibratory
feeder bowls to the production and testing of complete vibratory feeding systems
including hoppers, part escapements and sound enclosures.
Our engineers are always eager to provide quick and
accurate quotations on any
feeder system. Quotes can be developed off of part drawings, however, quote
accuracy is enhanced when the request is accompanied by a sample of the part.
City: Eau Claire
Category: Control Panels & Annunciators
Over the past three decades Automation Displays, Inc (ADI), has developed a deep
commitment to their customers and their needs. ADI's mission is to design and
build superior industrial, commercial & detention control panels and
annunciators that meet the needs of the end user and interface seamlessly with
the customer's automated systems and controllers. ADI is a registered UL7 Listed
control panel manufacturer authorized to manufacture UL 864 and 508 control
panels. As a custom control panel manufacturer Automation Displays, Inc seeks to
provide graphic panel solutions for a variety of environments and industries.
ADI's custom electronic components can effectively control indicators, manage
switching devices, and communicate via RS232, RS422 and RS485 serial interfaces
to the customer PLC, SCADA system, Building Automation System or other system.
Full color graphics highlight what needs to be conveyed by the graphic control
panel to the operator quickly and efficiently. ADI is always interested in new
and unique challenges and opportunities. Recent opportunities range from
manufacturing small watertight temperature control panel annunciators for
operating rooms to building large scale mosaic tile displays for the Chesapeake
City: San Diego
Category: Precisiom Measurement Systems
Precision Measurement Systems and Process Control for the Interconnect Industry.
AEI offers innovative tools to help you to monitor your
production process and
to help you make better products.
AEI provides a unique combination of technologies which
improve your yields.
From automatic in-line inspection to automated manual measurement, AEI's AIM,
TOMM, and MARC each allow you to control your manufacturing in ways never before
Category: Motion Control & Servo System Products
Automation Intelligence is offering world-class Sanyo Denki motion control and
servo system products. We have also formed a partnership with highly trained
VARs (Value Added Resellers) to help you at the local level.
City: St Louis
Category: Process Controls
Since 1956, Automation Service has met the process control needs of many
different industries around the globe. To provide the highest possible quality,
we do not rebuild or refurbish any instrument. Instead, we completly
remanufacture every component, then manufacture instruments from those
Our remanufactured instruments offer our customers a
superior value for their
Category: Coating Thickness Measurement Gauges
Automation USA is a premier source including sales service of hand-held coating
thickness gauges as well as other paint related physical test equipment in North
and South America. Automation USA's success has been attributed to the ability
to consistently deliver quality services and products to its customers. A total
commitment to customer satisfaction is built into everything that we do
including outstanding after-sale support.
Category: Auto Gauging
Automec is located in Waltham Massachusetts where it was founded in 1969. We
specialize in the area of retrofitting either existing or newly purchased press
brakes and shears with simple, reliable, and cost effective gauging systems.
All of our products are designed and manufactured
exclusively in the USA.
We have emerged as an industry leader with over three
decades of successful
product development experience and an installed base of several thousand systems
both in the USA as well as in more than 20 countries abroad.
Our computerized gauging systems can be installed on
either press brakes or
shears and profoundly increase the productivity of machinery they are attached
to by dramatically reducing material handling during the manufacturing process.
These systems are noted for their ease of programming, high reliability, and
Category: Test Motor Winding
After 15 years of traveling the country manually testing motor winding
insulation resistance, Joe Horvath realized the need for an automatic insulation
tester. In 1982 Joe teamed up with Jim Miller and together they created the
world's first truly automatic insulation resistance tester and Automeg Inc was
born. In 1990 Ralph Chin was contracted to develop the Phasemeg. The company now
holds three separate U.S. patents. In 2002 Automeg Inc celebrated its 20th
City: Ann Arbor
Category: Industrial Automation & Motion Control
Automotion Inc is a group member of Infranor Inter AG, a public company listed
on the Zurich stock exchange, with consolidated sales of over 83 million Swiss
Francs, a worldwide manufacturer and supplier of servomotors, servo amplifiers
and high performance servo systems.
Category: Signal Routing Systems
At AutoPatch, we've been building high-performance signal routing systems for
over 15 years and that focus provides us the perspective to do it better than
anyone else. In fact, we pride ourselves on building the highest quality,
ultimately flexible and extremely reliable matrix switchers available-period.
And we stand behind every unit we sell with our exclusive AutoPatch Lifetime
Warranty and a level of customer service that is unmatched in the industry
City: San Diego
Category: Interconnect Products
Autosplice was started in New York City in 1954 and in those early days the firm
was named General Staple Company. In the years up to 1967 General Staple was a
distributor (not a manufacturer) of industrial stapling machines. Our exciting
growth path started in 1967 when a customer requested General Staple to build a
machine that would splice two electrical wires together. This simple, innocent
request would ultimately change the Company into a worldwide manufacturer of
innovative interconnection machines and connectors selling to the electrical and
This project, to build a machine that would splice two
together, turned out to be much more difficult than was originally anticipated.
Putting a crimp connection, or splice, around two wires fraught with problems.
If the splice was crimped too tightly around the wires, it broke or fractured
the wires. If the splice was crimped too loosely, the wires pulled apart, making
for an incomplete connection. After a considerable amount of time, together with
an enormous amount of experimenting and testing, the problem was solved.
The solution involves a machine that uses a special strip
material. This strip
material (which we call spliceband) is made with serrations (hills and valleys)
along the length of the strip. An operator positions the wires to be spliced
into the machine and then steps on an electric foot switch. The machine, in one
operation, feeds a length of the serrated strip, cuts it, forms it and securely
crimps it around the wires. In the center top of the splice, the tooling makes a
wedge or a dimple which reliably holds the wires that are being crimped against
the serrations of the spliceband. This development turned out to be a remarkably
simple and effective solution to the problem. The result was an economical
scrap-free system that virtually anyone could run with little or no training.
Patents were applied for, the product was promoted, and a special division
called Autosplice was set up to specifically handle sales for the
Category: Digital Warning System
Manufacturers of digital signal warning systems viz., warning sirens, siren
controllers, dispatch/paging, radio receivers, telephone equipment, traffic
City: San Antonio
Category: Automated Test Equipment
Auto test Company designs, manufactures and integrates Power Supply and UPS
Automated Test Equipment (ATE) and peripherals for OEM clients across a broad
spectrum of industries.
Auto test was founded in 1976 with a goal to provide an
automated and flexible
testing system for power supplies - at an affordable cost. Since 1977, Auto test
has expanded its product line to include a full series of ATE products ... from
versatile desk top units to fully featured and integrated, rack mounted system
City: Eden Prairie
Category: Pressure Transducers
Auto Tran, Incorporated, formerly a division of Innovex for 6 years, was formed
as a corporation in 1991. Today we are a worldwide supplier in our product
market, custom pressure transducers for low pressure applications. The primary
areas we serve are the HVAC marketplace and the medical market, although our
products are utilized in a variety of applications where accurate low pressure
measurement is required.
Our product line includes pressure transducers suited to
air applications as
well as water, hydraulic fluids, ammonia, steam, refrigerant, and other harsh
media. Development of product designs and manufacturing processes are done to
ISO 9001 procedures. Also, our products are designed for quick, reliable
customization to customer desired pressure ranges (including bi-directional
ranges) and output signals. With Auto Tran, we customize so you do not have to
compromise your designs.
Auto Tran designs and manufactures our pressure
transducers at our Minneapolis,
Minnesota facility. Our production facility is suited to handling jobs ranging
from a single custom piece order for an individual controls contractor to large
volume OEM production. All of our products are calibrated to NIST-traceable
standards and are provided with a 2-year warranty.
City: Crystal Lake
Category: Gear Motors
Autotrol has been a leading manufacturer of customized sub-fractional horsepower
gear motors since 1964. With a tradition of reliability and personalized
engineering service, Autotrol is recognized for its innovative solutions to
global application problems.
Autotrol's motors are available with gear trains that
offer a wide range of
output speeds, down to one revolution per month in the AC line.
City: Los Angeles
Category: Color Measurement & Machine Vision Systems
Auto Vision is committed to high performance imaging, spectral imaging, remote
sensing, and automation systems.
Automated imaging systems for quality control and
production automation. Vision
systems measure, count, look for defects, and raise quality and production
Precision color & spectral imaging reveal the real
colors of your product and
materials. Check out the color profiling systems from Auto Vision to find your
City: Lithia Springs
Category: Machine Vision Products
At Avalon, plastics isn't just another business to us. It's our only business.
Since 1992, Avalon machine vision products have been the preferred solution for
the plastic industry's most critical process and part inspection challenges. Our
mission? To help dramatically improve the quality, productivity and
profitability of your manufacturing processes and products using advanced vision
inspection technologies.Avalon Vision Solutions, LLc is located in Lithia
Springs, (Atlanta) GA. We employ people in sales, customer support, applications
engineering, and product development - positions that directly support our
customers' successful use of vision systems in their plants. Avalon's ownership
is spread throughout the sales and service functions and our top management is
directly focused on our customers' satisfaction for each and every solution we
Category: Integrated Photonic Subsystems
Avanex Corporation offers a broad range of integrated photonic subsystems,
integrated optical modules and passive optical components to improve the speed
and capacity of fiber optic transmission networks.
Intelligent Photonic Solutions? from Avanex encompass
discrete active or passive
stand-alone components, integrated optical modules and optical subsystems.
Avanex solutions and technologies address the core functions of optical
transmission networks: amplification, dispersion compensation, multiplexing and
signal processing, switching and routing, and transmission and include network
City: Princeton Junction
Category: Smart Card Technology
Avante International Technology Inc pioneered the use of smart card technology
for access control, time-attendance and debit applications since 1995. Since
then, Avante has installed bases of access control applications including
office, apartment, university and manufacturing complexes. The success and
loss-free security achieved on these installations has proven to be unsurpassed.
Avante is a sister company of AIT (AI Technology, Inc.).
AIT has more than 15
years of achievements in special electronic adhesives and interconnections.
Employing some of its patented interconnection technologies, the two companies
have co-developed many patents pending on manufacturing robust smart (Radio
Frequency Identification, RFID) tags and smart card with unparalleled
Avante has also developed special patent pending
technologies in automated data
capturing. VOTE-TRAKKERÔ is a novel electronic voting system designed for 100%
transparency with 100% privacy. RFID Lead Retrieval System is RFID system for
tradeshow leads capturing and retrieval management. Special antenna arrays and
application systems have also been developed for RFID tracking in manufacturing,
inventory, and retail environments.
Avcom is a complete electronic service manufacturer that offers the ability to
choose the services you require. Avcom will manage and produce your entire
project or perform a single service that fits your needs. We have the
flexibility to handle existing designs that require hand assembly, as well as,
Page 14 | Page 15 | Page 16 | Page
17 | Page 18 | Page 19 | Page 20